Peptides Vietnam LogoPeptides Vietnam
Blend Math

Peptide Blend Calculator

This peptide blend calculator starts from one fact: in a fully dissolved, evenly mixed blend, one draw delivers every compound in a fixed ratio, so you cannot change one without changing the others. The tool shows how much of each compound a chosen draw holds; it does not choose an amount for anyone.

Enter two to four compounds, the mg of each in the vial, and the water you add. Pick a draw in syringe units, or name the mcg you want of one compound. You get the mg per mL of each compound and the mcg of each one in that draw. It is arithmetic on your numbers. It holds no dose for any compound and makes no claim that a mix is a good idea.

On this page

Your blend vial

Work from

Draw: 10 units (0.1 mL). The vial holds about 20 draws of this size.

Compoundmg per mLmcg per unitmcg in this drawRatio
Compound A5505001
Compound B2.5252500.5

Ratio is each compound mg divided by the first compound mg. Arithmetic only, not a dose.

Peptara Labs, our supply partner, lists bacteriostatic water as well as peptides, and ships Vietnam orders in insulated packaging.

Browse Peptara Labs

We may earn from purchases made through our links.

Why does one draw move every compound at once?

Once the powders have fully dissolved and the liquid is evenly mixed, they share one solution. Each drop then holds the compounds in the proportion set by the mg of each one in the vial. For draws from that same vial, the syringe cannot change that proportion.

Water changes the strength, not the ratio. Taking the final volume as the water added, twice the water means each unit holds half as much of every compound. The ratio between them stays put.

That is the main thing that sets a blend apart from separate vials. With separate vials, the amount from each vial can be set apart from the others. With a blend, choosing the amount of one compound also chooses the amount of the rest.

How is the amount of each compound worked out?

The calculator runs four short steps for each compound.

  1. Strength: mg per mL = mg of that compound ÷ mL of water.
  2. Per unit: a U-100 syringe marks 1 mL as 100 units, which makes each unit 0.01 mL. mcg per unit = mg per mL × 1,000 ÷ 100.
  3. Draw volume: mL = units ÷ 100.
  4. Amount in the draw: mcg = mg per mL × draw mL × 1,000.

In target mode it runs step 4 backwards for the compound you pick: units = target mcg ÷ (mg per mL × 1,000) × 100. Then it runs the four steps for every other compound at that draw.

One assumption: the final liquid volume is treated as the water you add. To move between mcg and mg by hand, the mcg to mg converter does it both ways, and the insulin syringe units chart shows what each mark holds in mL.

Sources: 1, 2

What does a worked blend table look like?

The two tables below use made up round numbers so the arithmetic is easy to follow. Compound A, B and C are placeholders. These are arithmetic examples, not doses, and they do not describe any real product.

Example 1: 10 mg of A and 5 mg of B in 2 mL (ratio 2 to 1)

Strengths: A is 5 mg per mL and B is 2.5 mg per mL, so one unit holds 50 mcg of A and 25 mcg of B.

Draw (units)Draw (mL)mcg of Amcg of BDraws per vial
50.0525012540
100.150025020
200.21,00050010
250.251,2506258
500.52,5001,2504

Example 2: 20 mg of A, 10 mg of B and 5 mg of C in 2 mL (ratio 4 to 2 to 1)

Strengths: 10, 5 and 2.5 mg per mL, which is 100, 50 and 25 mcg per unit.

Draw (units)mcg of Amcg of Bmcg of CDraws per vial
550025012540
101,00050025020
202,0001,00050010
252,5001,2506258
505,0002,5001,2504

Arithmetic examples with placeholder compounds, not doses.

Sources: 1, 2

What happens when you aim at one compound?

Take Example 1 and suppose the number you care about is 300 mcg of Compound B. B is 2.5 mg per mL, which is 2,500 mcg per mL. So the draw is 300 ÷ 2,500 = 0.12 mL, or 12 units.

That same 12 unit draw also carries 600 mcg of Compound A, twice the B figure, because the vial ratio is 2 to 1. You did not pick the A number. The ratio picked it.

This is the reason the calculator always shows every compound, even in target mode. A figure for one compound tells only part of what is in the syringe.

Arithmetic example with placeholder compounds, not a dose.

Which tool fits a single vial or a named blend?

Any other mix of two to four compounds, or a named blend at a different strength, fits the tool on this page.

Frequently asked questions

What does a peptide blend calculator work out?

It takes the mg of each compound in one vial and the mL of water added, and returns the strength of each compound in mg per mL. Then, for a draw in syringe units, it shows how many mcg of every compound that draw holds.

Can I raise one compound in a blend without raising the others?

No. Once every compound is fully dissolved and evenly mixed in the same liquid, any draw carries all of them in the same ratio as the vial. Drawing more of one means drawing more of every other one. From a single blend vial, no amount can be changed on its own; separate vials allow that.

How do I find the ratio of a blend?

Divide the mg of each compound by the mg of the first one. A vial with 10 mg and 5 mg has a 2 to 1 ratio. Adding more or less water does not change it, because water dilutes every compound by the same amount.

Does adding more water change the amount in each unit?

Yes. More water lowers the mcg in every unit for every compound at once, and the ratio stays the same. In the 10 mg plus 5 mg example, 2 mL gives 50 and 25 mcg per unit, while 4 mL gives 25 and 12.5 mcg per unit.

How many draws are in one blend vial?

Divide the water mL by the draw mL. With 2 mL of water and a 10 unit draw (0.1 mL), the vial holds 20 draws. This ignores the small amount left in the vial and the syringe.

What if I want a set amount of just one compound?

Use the target mode. You pick the compound and the mcg, and the calculator finds the draw in units, then shows what the other compounds bring with them in that same draw.

Is this calculator a dosing guide?

No. It does arithmetic on the numbers you type. It holds no dose for any compound and says nothing about whether two compounds should be mixed.

Education, not medical advice

This calculator does arithmetic on the numbers you enter. It does not choose an amount, judge whether compounds belong together, diagnose or prescribe. Check every figure against your own source before you measure anything.

Use, share or cite this calculator

Embed it on your site, copy a citation, or add Peptides Vietnam as a preferred source on Google.

Sources

  1. 1.MedlinePlus (NIH National Library of Medicine). Giving an insulin injection (U-100 means 100 units per mL; one notch equals one unit on the 1 mL barrel), read 2026-11-16
  2. 2.NIST, metric SI prefix table (used here for 1 mg = 1,000 mcg), read 2026-11-16